Everyone knows that a structured cabling system is the foundation of every business network, providing connectivity between servers, computers, and other network devices and allowing both voice and data to be sent worldwide. When it comes to data cabling, there are different mediums available to carry that data, transferring it from point A to point B. Traditionally, twisted pair copper cable has been and is still currently used as the most common form of structured data cabling, transmitting data through copper wires. As technology continues to advance however, and the demand for faster, more advanced methods of networking grows, fiber optic cabling is quickly on its way to becoming the next generation standard in data cabling.
Benefits of fiber optic cabling include:
o Longer distances – Signals carried through fiber optic cable can go up to 50 times longer than those using copper wires due to low attenuation (signal loss) rates, without requiring a signal repeater to maintain the integrity of the signal over long distances as copper wire cables do.
o Intrusion prevention – With copper wire cable systems, it is possible to remotely detect a signal being broadcast over the cable, which can present unwanted security loopholes. This is not an issue with fiber optic cable as its dielectric nature makes remote detection impossible, and gaining access to the fiber itself would require a physical intervention that would be easily thwarted by a well placed surveillance system.
o Installation improvements – Longer lengths, smaller diameter, and lighter weight of fiber optic cable make installation and upgrades easy and less costly than with copper cables.
o Higher bandwidth and data transfer rates – With wider bandwidth, more data is able to be transferred at a much faster speed. This allows for shorter download times and increased network efficiency.
o EMI Immunity – Fiber optic cables can be installed in areas with high Electromagnetic Interference (EMI), as the absence of metallic wiring makes the cable completely now tv 優惠 immune to EMI.
Depending on your specific data cabling requirements, there are two different types of fiber optic cable available to meet your needs:
o Multi-Mode fiber – Multi-mode fiber has a large core diameter, where light may be broadcast through multiple paths on its way to its destination. This gives multi-mode fiber high transmission capacity, but only retaining reliability over short distances generally less than 8 miles, limited by modal dispersion.
o Single-Mode fiber – Single-mode fiber has a much smaller core diameter than multi-mode, allowing only one path for light to be broadcast through. Single-mode is used for long distance transmission, well exceeding the limits of multi-mode, and is not limited by modal dispersion.
Different environments also require different types of cabling systems to ensure the fiber stays in good condition. Depending on where you are installing the cable, there are two basic types of fiber cabling systems that can be used:
o Inside plant – Inside plant fiber cabling systems are designed for use inside a building where they generally have no contact with environmental variables. In a typical fiber inside plant cable system, individually coated fibers are positioned around a dielectric strength member core, and then surrounded by a subunit jacket. Aramid yarn(Kevlar) surrounds the individual subunits within the cable, reinforcing tensile strength. Some inside plant fiber cabling systems have an outer strength member as well, meant to provide protection to the entire cable. For inside plant installation, fiber ribbon-cable systems are also frequently used. Ribbon cables have a flat ribbon-like configuration that allows installers to conserve conduit space as they install more cables in a particular conduit.
o Outside plant – When installing fiber optic cable either outside or underground, an outside plant fiber optic cabling system is used. Outside plant fiber cabling systems are composed of individual gel-filled subunit buffer tubes which are placed around a central core strength member. Within each subunit buffer tube, buffer coated fibers are placed around a strength member. A binder that contains a water-blocking compound encloses all of the subunit buffer tubes, which is then enclosed by an outer strength member usually composed of aramid yarn. Corrugated steel is used to provide physical protection and acts as an external strength member, placed between an inner MDPE jacket and an outer HDPE jacket.